Petroleum Science >2022,??lssue 2:??- DOI: https://doi.org/10.1016/j.petsci.2021.12.019
Time-dependent borehole stability in hard-brittle shale Open?Access
文章信息
作者：Chuan-Liang Yan, Lei-Feng Dong, Kai Zhao, Yuan-Fang Cheng, Xiao-Rong Li, Jin-Gen Deng, Zhen-Qi Li, Yong Chen,
作者單位：
投稿時(shí)間：
引用方式：Chuan-Liang Yan, Lei-Feng Dong, Kai Zhao, Yuan-Fang Cheng, Xiao-Rong Li, Jin-Gen Deng, Zhen-Qi Li, Yong Chen, Time-dependent borehole stability in hard-brittle shale, Petroleum Science, Volume 19, Issue 2, 2022, Pages 663-677,
文章摘要
Abstract
Rock damage appears in brittle shale even prior to peak stress (i.e., before failure) due to the occurrence of microcracks in these rocks. In this work, a coupled hydromechanical model was built by incorporating the mechanical and fluid seepage induced stresses around a wellbore during drilling. The borehole instability mechanism of hard-brittle shale was studied. The results show that even if a well is simply drilled into a hard-brittle shale formation, the formation around the borehole can be subjected to rock damage. The maximum failure ratio of the formation around the borehole increases with drilling time. A lower drilling fluid density corresponds to a faster increase in the failure ratio of the borehole with time and a shorter period of borehole collapse. When the initial drilling fluid density is too low, serious rock damage occurs in the formation around the borehole. Even though a high-density drilling fluid is used after drilling, long-term borehole stability is difficult to maintain. While drilling in hard-brittle shale, drilling fluid with a proper density should be used rather than increasing the density of the drilling fluid only after borehole collapse occurs, which is more favorable for maintaining long-term borehole stability.
Rock damage appears in brittle shale even prior to peak stress (i.e., before failure) due to the occurrence of microcracks in these rocks. In this work, a coupled hydromechanical model was built by incorporating the mechanical and fluid seepage induced stresses around a wellbore during drilling. The borehole instability mechanism of hard-brittle shale was studied. The results show that even if a well is simply drilled into a hard-brittle shale formation, the formation around the borehole can be subjected to rock damage. The maximum failure ratio of the formation around the borehole increases with drilling time. A lower drilling fluid density corresponds to a faster increase in the failure ratio of the borehole with time and a shorter period of borehole collapse. When the initial drilling fluid density is too low, serious rock damage occurs in the formation around the borehole. Even though a high-density drilling fluid is used after drilling, long-term borehole stability is difficult to maintain. While drilling in hard-brittle shale, drilling fluid with a proper density should be used rather than increasing the density of the drilling fluid only after borehole collapse occurs, which is more favorable for maintaining long-term borehole stability.
關(guān)鍵詞
-
Shale; Rock damage; Drilling fluid density; Borehole stability